3D print tin stompbox (2 knobs)

75,00 kr

This is an STL file that you can download for a 3D printer.

Customer Rating (0) Submit a Review
SKU: 600-4822 Categories: ,

Load your 3D printer with this 3D model file and print! Choose the print quality and material yourself.

The box is adapted to some of Moody’s kits with PCB-mounted pots, which will be released in the spring of 21, but it can of course be used for other builds. The tele jacks are located near the bottom plate and if you place the PCB near the panel (eg with the help of PCB-mounted pots) it is possible to get a fairly large PCB in the box. The tele jacks do not “collide” with the PCB. Estimated max size card: 70 x 60mm without battery.

The box dimensions
Diameter 116 mm
Height 40 mm

Screw in the bottom 3 pcs 3x12mm

Proposed to be printed in ABS, PLA or ASA

The holes have the following dimensions
Potentiometer: 7 mm
Foot switch: 12 mm
Telejack: 9.5 mm
Current jack: 12 mm
LED: 4.8 mm

3 mm screws can be used as mounting screws for the lid. Buy pedal parts that fit the box, and have it sent to you, or use the one you already have. The following parts fit perfectly:

Footswitch 3pdt blue
Mono telejack
Stereo telejack
Current jack
Battery connector
Potentiometer
LED

Note that an extra cord must be connected between the tele jacks for grounding, the box does not conduct electricity.